Baseboard And Trim Replacement Plus Repairs
Observing damaged or chipped baseboards is likely the result of people walking, or furniture being dragged, over the course of several months or years. Many will be inclined to simply replace the boards that have been damaged, yet there are easier ways to make everything look better. Fins out what you can do about damaged baseboards and trim with Skyline Drywall Repair Professional guidance.
The imperfections that you see can be restored quite easily, especially if there are holes in the baseboards that do not have to be replaced. If you are currently residing in a home that is older, you may damage plaster in that home by removing the baseboards adjacent to the floor.
Joint compounds have been used for years to fill in areas that are damaged, a material that is similar to mud used for drywall. A taping knife is really all that you need to reshape what has been damaged. When done several times, it will look much better once it has dried.
Steps for Restoring a Baseboard
- You must first find a small piece of wood that can act as a patch. It should be relatively thin, and definitely thinner than the baseboard itself. These should be right around 3/8”-1/2”.
- When you are patching these holes, you will need to use ¾ stock – plywood, composite board, or even MDF; simple scrap wood will suffice for most of these restoration projects.
- Using a drill with screws, you can affix the template over a specific area.
- Routers are excellent tools that you can use with a straight bit, or a flush cutting bit, to cut out the template. You will want to avoid cutting to the full depth, making it as shallow as possible. Using glue, you can make everything much more stable. The depth of the hole for this patch is presented in Step 1. A vacuum can be used to remove any remaining dust.
- Chisels can be used to square the corners on the hole.
- Next, tap this into place and glue the patch. Nails will not be necessary; the glue will be more than you actually need.
- Using a sander, you will want to smooth out the patch. Prime and then paint this piece.
You should try to obtain a molding profile that is very similar to the existing trim – if it is custom-made, be prepared to pay more money.
You can use a dutchman to patch the baseboard – this patch that is glued will be placed into a custom cut hole.
Now you can patch the hole, and also cut the hole so it matches the patch. Custom-made tablets can be produced with routers when creating the hole.
Common DIY Interior Trim Repairs
The crown molding may reveal several gaps, and you may also notice that your door and window trim could be scratched, prompting you to do trim repairs that will improve the way that it looks.
USING DRYWALL MUD OR WOOD PUTTY
Fixing these problems may only take a small amount of wood putty or drywall mud for the holes and gaps. Damaged textures can also be fixed using this material.
WHY YOU SHOULD USE CAULK
You will need to take out your caulk gun to start using this material. Once the caulk is out, use your finger to spread it around so it can drive.
REPLACE SECTIONS OF MOLDING
Water damaged, cracked, or rotted molding could be beyond repair, which is why replacing these sections damaged moldings would be the best decision. Then, you will need to refinish and paint to complete the process.